Board definition for Elecrow ESP32 Terminal

Is anyone aware of a board definition that would match the hardware for ESP32 Terminal- 3.5 Inch 480x320 TFT Capacitive Touch Display(RGB) with Chip ILI9488 ??


1 Like

Their official docs say to treat it as a “ESP32S3 Dev Module” in the Arduino IDE with Flash mode QIO, 80MHz, Flash size 16MB and OPI PSRAM. Thus this should 100% match what was already said before at Enable OPI PSRAM and 16MB QIO80MHz of FLASH - #2 by maxgerhardt.

1 Like

Thanks much @maxgerhardt

To save platformio users time, this worked for me:

platform = espressif32
framework = arduino
board = esp32-s3-devkitc-1
monitor_speed = 115200
build_flags = -DBOARD_HAS_PSRAM
board_build.arduino.memory_type = qio_opi
board_build.f_flash = 80000000L
board_build.flash_mode = qio
; 16MB
board_upload.flash_size = 16MB

The Elecrow ESP32 3.5" SPI terminal (DLC35020S) is small but packed with features! Is it a good choice for your robot?

Thank you!
Can you share some code example for GUI usage? It can help as a jumpstart.

The LVGL project has a number of demo applications you can try.

1 Like