I have found a fix - this is all due to my not realizing that the nucleo boards have an order code
as mentioned in the datasheet you linked for MB1180. In my case
-
The order code is NUCLEO-L432KC which is mentioned both in the datasheet and on a sticker
on the board. (For others with this issue, the sticker is just the L432KC and is stuck to the metal on the usb receiver on the board with a small dymo like label.) -
The part number on the chip is F103CBT6, not F103C8T6. High magnification was required to
detect the B not 8. This is a current part number.
Bottom line is that there is a
board = nucleo_l432kc
which matches the order code and which
makes everything work properly.
Sorry to lead you down the wrong path with my misreading of the part number, and thanks again
for all the help.
Regards,
j