Again for completeness:-
Building in release mode
Checking size .pio/build/sipeed-longan-nano-lite/firmware.elf
Advanced Memory Usage is available via "PlatformIO Home > Project Inspect"
RAM: [= ] 11.3% (used 2310 bytes from 20480 bytes)
Flash: [= ] 10.0% (used 6572 bytes from 65536 bytes)
Configuring upload protocol...
AVAILABLE: altera-usb-blaster, gd-link, jlink, rv-link, serial, sipeed-rv-debugger, um232h
CURRENT: upload_protocol = sipeed-rv-debugger
Uploading .pio/build/sipeed-longan-nano-lite/firmware.elf
Open On-Chip Debugger 0.10.0+dev-00911-gcfbca74bd (2019-09-12-09:31)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Warn : Transport "jtag" was already selected
jtag
adapter speed: 1000 kHz
Info : clock speed 1000 kHz
Info : JTAG tap: riscv.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Warn : JTAG tap: riscv.cpu UNEXPECTED: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Error: JTAG tap: riscv.cpu expected 1 of 1: 0x1e200a6d (mfg: 0x536 (Nuclei System Technology Co.,Ltd.), part: 0xe200, ver: 0x1)
Info : JTAG tap: auto0.tap tap/device found: 0x790007a3 (mfg: 0x3d1 (GigaDevice Semiconductor (Beijing)), part: 0x9000, ver: 0x7)
Error: Trying to use configured scan chain anyway...
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -irlen 5 -expected-id 0x790007a3"
Warn : Bypassing JTAG setup events due to errors
Info : datacount=4 progbufsize=2
Info : Exposing additional CSR 3040
Info : Exposing additional CSR 3041
Info : Exposing additional CSR 3042
Info : Exposing additional CSR 3043
Info : Exposing additional CSR 3044
Info : Exposing additional CSR 3045
Info : Exposing additional CSR 3046
Info : Exposing additional CSR 3047
Info : Exposing additional CSR 3048
Info : Exposing additional CSR 3049
Info : Exposing additional CSR 3050
Info : Exposing additional CSR 3051
Info : Exposing additional CSR 3052
Info : Exposing additional CSR 3053
Info : Exposing additional CSR 3054
Info : Exposing additional CSR 3055
Info : Exposing additional CSR 3056
Info : Exposing additional CSR 3057
Info : Exposing additional CSR 3058
Info : Exposing additional CSR 3059
Info : Exposing additional CSR 3060
Info : Exposing additional CSR 3061
Info : Exposing additional CSR 3062
Info : Exposing additional CSR 3063
Info : Exposing additional CSR 3064
Info : Exposing additional CSR 3065
Info : Exposing additional CSR 3066
Info : Exposing additional CSR 3067
Info : Exposing additional CSR 3068
Info : Exposing additional CSR 3069
Info : Exposing additional CSR 3070
Info : Exposing additional CSR 3071
Info : Examined RISC-V core; found 1 harts
Info : hart 0: XLEN=32, misa=0x40901105
Info : Listening on port 3333 for gdb connections
Info : device id = 0x19060410
Info : flash_size_in_kb = 0x00000040
Info : flash size = 64kbytes
Info : JTAG tap: riscv.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Warn : JTAG tap: riscv.cpu UNEXPECTED: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
Error: JTAG tap: riscv.cpu expected 1 of 1: 0x1e200a6d (mfg: 0x536 (Nuclei System Technology Co.,Ltd.), part: 0xe200, ver: 0x1)
Info : JTAG tap: auto0.tap tap/device found: 0x790007a3 (mfg: 0x3d1 (GigaDevice Semiconductor (Beijing)), part: 0x9000, ver: 0x7)
Error: Trying to use configured scan chain anyway...
Warn : Bypassing JTAG setup events due to errors
** Programming Started **
** Programming Finished **
** Verify Started **
** Verified OK **
Info : Hart 0 unexpectedly reset!
*** [upload] Error 1
========================================================================= [FAILED] Took 13.91 seconds =========================================================================
The terminal process "platformio 'run', '--target', 'upload'" terminated with exit code: 1.