nRF52-DK Tutorial Error Code


I keep getting this error while setting up the nRF52-DK board. I’ve tried updating the firmware and build to no avail and I don’t know where to go from here.

This is the tutorial I’ve been following:

This is the error code:
arm-none-eabi-objcopy: .pioenvs\nrf52_dk\firmware.hex 64-bit address 0x4b4fa300000000 out of range for Intel Hex file
arm-none-eabi-objcopy:.pioenvs\nrf52_dk\firmware.hex: bad value
*** [.pioenvs\nrf52_dk\firmware.hex] Error 1

Any insight would be greatly appreciated!

Building with platform = nordicnrf52@3.1.0 works and it is also the most recent one (Releases · platformio/platform-nordicnrf52 · GitHub). Please replace the above line in your platformio.ini or just update your platformio platforms, either using the VSCode IDE or pio platform update.